Thank you for showing your confidence in us by purchasing the BEHRINGER DYNAMIC WAH DW400.
This effects pedal delivers a variety of wah effects including a Human Voice mode creating an
unbelievable “talking” sound. Experience exciting new sounds!
1. Controls
(1)
Select the effect mode via the
MODE
switch:
UP:
Creates a Wah effect. The filter moves
upwards (from low to high frequencies).
DOWN:
Creates a Wah effect. The filter
moves downwards.
SYNTH:
A stronger upward Wah effect with
a synth-like resonance filter sound.
HUMAN VOICE:
Turns your instrument
signal into the sound of a human voice.
The sound alters between 2 selectable
vowel sounds and adds slight overdrive.
TEMPO:
Auto Wah. Tap in the tempo via
foot switch
(10)
or external foot switch.
(2)
SENS
determines the effect sensitivity,
depending on the input level. In HUMAN
VOICE mode, it selects the first vowel.
In TEMPO mode, this control has
no function.
(3)
The
MANUAL
control determines the wah
effects’ lowest frequency. In HUMAN VOICE mode, it selects the second vowel. In TEMPO mode,
this control has no function.
(4)
The
DECAY
control determines how quickly the filter is shifted. In TEMPO mode, you can shape the
LFO wave form from Sine (min) to Square wave (max).
(5)
The ¼" TRS
EXP/CTL
connector can be used to connect two different types of pedals:
•
Use an expression pedal for Wah pedal functionality (for all modes).
•
Use an external foot switch instead of the pedal foot switch (
(10)
) to tap in the effect time
(in Tempo mode only).
(6)
Use the ¼" TS
GTR IN
connector to plug in a guitar. Use either input
(6)
or
(7)
.
(7)
Use the ¼" TS
BASS IN
connector to plug in a bass guitar. If you use this input, the filter parameters
are optimized for bass signals. With a cable in input
(6)
, this input has no function.
(8)
The ¼" TS
OUT
connector sends the signal to your amp or other effects devices.
DYNAMIC WAH DW400
Ultimate Auto-Wah/Human Voice Effects Pedal
(4)
(8)
(5)
(9)
(6)
(7)
(1)
(10)
(2)
(3)
UP, DOWN, SYNTH
HUMAN VOICE
TEMPO
SENS
effect sensitivity,
depending on input level
Wah 1:
Selects the first vowel
no function
MANUAL
starting frequency
of Wah effect
Wah 2:
Selects the second vowel
no function
DECAY
Envelope
Response Time
Selects the Time used to
move from Wah 1 to Wah 2
LFO waveform shape:
Sine (Min) > Square (Max)
EXP/CTL*
Wah pedal (SENS, MANUAL
and DECAY disabled)
Fades between Wah 1 and
Wah 2 (DECAY disabled)
Wah pedal
(DECAY disabled)
*Connect an expression pedal (e.g. the FCV100) to the EXP/CTL connector
