background image

(1) 

Select the effect mode via the 

MODE

 

switch (see table below).

(2) 

Use the 

D.TIME 

control to fine-tune the 

delay time. The delay time describes 

how fast the signal repetitions will 

follow after the original signal. 

Depending on the selected mode, 

you can adjust it between 1 ms and 

2000 ms. In HOLD and TEMPO modes, 

D.TIME is disabled.

(3) 

The 

F.BACK

 (feedback) control adjusts 

the amount of signal repetitions. 

In HOLD mode, F.BACK is disabled.

(4) 

LEVEL

 adjusts the effect level.

(5) 

Use the ¼" TS 

IN

 connector to plug in 

the instrument cable.

(6) 

Use the ¼" TS 

TEMPO

 connector to 

connect an external foot switch.  

Use the foot switch to tap in the song 

tempo (in TEMPO MODE).

(7) 

The ¼" TS 

OUT A

 connector sends a mono signal to your amp. In E/D mode, it sends the 

effect signal only.

(8) 

Use the 

PAN OUT

 connector and OUT A to acheive a full stereo delay effect. In E/D mode, 

it sends the dry signal only.

(9) 

The 

ON/BATT

 LED illuminates when the effect is activated. It also serves as a battery level indicator.

(10) 

Use the foot switch to activate/deactivate the effect. In HOLD mode, use the foot switch to start 

and stop the recording. The signal is recorded while holding down the foot switch. Playback begins 

immediately after releasing it.

DIGITAL DELAY DD600

Digital Stereo Delay/Echo Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL DELAY DD600. 

This digital Delay effects pedal is designed to deliver 24-bit high-resolution stereo delay sounds 

comparable to state-of-the-art studio processors. Thanks to its parameter controls, you’ll have 

plenty of cool sounds at your disposal to handle every situation.

1.  Controls

A50-00000-52317

(4)

(8)

(9)

(1)

(5)

(10)

(3)

(2)

(7)

(6)

MODE

Effect Description

D.Time

1

DELAY

Short delay

1-50 ms

2

Short to medium delay

50-200 ms

3

Medium to long delay

200-800 ms

4

Long delay

800-2000 ms

5

HOLD

Record and playback your performance

(Rec.time: max.2 s)

6

REVERSE

Signal is repeated in reverse

1000-2000 ms

7

E/D

Stereo delay using OUT A and PAN OUT

1-400 ms

8

TEMPO

Adds a quarter note

D.TIME disabled.

Tap tempo via external foot switch

9

Adds  an eighth note

10

Adds a dotted eighth note

11

Add a triplet

Reviews: