Beghelli Planex PLNX Series Installation Instructions Download Page 1

1

Beghelli Canada Inc., 3900 14th Avenue, Markham, ON L3R 4R3 Tel: (905) 948-9500 Fax: (905) 948-8673

LED FLAT PANEL

Planex

®

PLNX

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

1.  Do not let power cords touch hot surfaces.
2.  Do not mount near gas or electric heaters.
3.  Equipment should be mounted in locations and at heights where unauthorized personnel will not readily subject it to tampering.
4.  The use of accessory equipment not recommended by Beghelli, may cause an unsafe condition, and will void the warranty.
5.  Do not use this equipment for other than its intended purpose.
6.  Vapor barrier must be suitable for 90°C in formats 24-l2 [only required in Canada].
7.  Minimum 90°C supply conductors.
8.  Suitable for DAMP LOCATIONS.
9.  This product must be installed in accordance with the applicable installation code by a person familiar with the construction and 

operation of the product and the hazards involved.

10.  Servicing of this equipment should be performed by qualified service personnel.

SAVE THESE INSTRUCTIONS! 

First make sure power is turned off before starting the installation!

Connect to VAC following wiring labels:
 

Connect VAC wires

  Labels with indicate: 
   

120-277VAC or 

  

120-347VAC, 

  

50-60Hz, 

   

(black) Line/Hot, 

   

(white) Neutral/Common

926000520

EACH MODEL NUMBER CONSISTS OF THE FOLLOWING: 

SERIES / SIZE / COLOUR TEMP. / INPUT

SERIES:

PLNX

SIZE: 

1 FT X 4 FT
2 FT X 2FT
2 FT X 4 FT

COLOUR TEMP.:

3500K, 4000K, 5000K

INPUT:

120-277VAC OR 
120-347VAC, 
50-60HZ

No user serviceable parts. Refer service to a qualified service

technician. Read instructions prior to installing and/or operating

this device. Installation should be performed by a licensed

electrician/installer in accordance with local codes.

INSTALLATION INSTRUCTIONS

Reviews: