52
4.4 How to use the hob
WARNUNG!
Never touch the cooking zones while the residual heat
indicator is still on. RISK OF BURNS!
NOTICE!
The residual heat indicators indicate hot cooking zones
after use. The residual heat indicators go off as soon as
the relevant cooking zones have cooled down.
How to start cooking
When the power is on, an acoustic signal sounds once; all
indicators of the cooking zones light up briefly. Now the
appliance has entered the stand-by mode.
(1)
Touch the O
N
/
O
FF
sensor.
(2)
An acoustic signal sounds and all indicators of the cooking
zones light up briefly. The appliance is in stand-by mode.
(3)
When you do not set a power level within 1 minute, the
appliance will switch off automatically. You have to start at
step 1 again.
(4)
Place a proper cookware on the desired
cooking zone. Always keep the bottom of the
cookware as well as the cooking zone clean
and dry.
(5)
Select the desired cooking zone by touching
the selection of cooking zone sensor.
(6)
Set the power level using the + / - sensors.
→
Each cooking zone is equipped with 9
power levels (1 - 9).
→
Touch + or - once to increase / decrease
the power level by 1.
→
Touch and hold + or - to increase /
decrease the power level by 1 in fast
mode.
