Installation and Technical Information
BEGA
Bollard Tube Options:
Please refer to bollard head
specification sheet for a complete list
of compatible bollard tube options.
Replacement Parts:
In the interest of product improvement, BEGA reserves the right to make technical changes without notice.
LED system bollard - luminaire head - unlit cap
71 127
Tools Required:
3mm hex key
Relamping/Maintenance
No relamping required.
Notice to Installer for 71 127:
1. See page 2 for specific product safety warnings.
NOTE: For proper installation, an accompanying system bollard tube must be
selected with the bollard head.
71 127 installation:
1. Install bollard tube per bollard tube installation instructions, including anchorage and
supply wiring connections (if applicable).
2. Insert bollard head into bollard tube by aligning pins.
3. Twist clockwise until bollard head will no longer turn. (Figure 1).
4. Lock into place by tightening hex screw.
Dimensions
A:
7 1/2
″
B:
7/8 ″
Description
Part No
BEGA
1000 Bega Way, Carpinteria, CA 93013 (805)684-0533 Fax (805)566-9474 www.bega-us.com © Copyright BEGA-US 2019
71 127
03/29/2019
1 of 2
Figure 1
A
B
