USING YOUR BACK INVERTA
ASSEMBLY AND ADJUSTMENTS
Fold out the main stand, (a) on a flat surface making
sure that the support bars lock out horizontally. (b)
Place the inversion bed .(c) on the top of the main
stand making sure that the circular guides on the
handles slot squarely into the pivot brackets at the
top of the main stand. The bed should swing freely in
these brackets.
Hold out the spring loaded pin at base of bed frame
(d), insert leg frame into the leg hole. Release the
spring loaded pin and replace the bolt to hold the leg
in place. Check that the leg rests on the correct side
of the main stand.
WARNING:
Befit
STRONGLY recommend consulting a chiropractor or physiotherapist before using your
back inverter, even if you do not have an existing back complaint. BeFit also recommend con-
sulting a doctor before use, particularly if you suffer from high blood pressure, obesity, heart
disease, asthma, osteoporosis or any other related condition.
Even if you have used a back inverter before, please pay attention to the instructions in this
leaflet.
Note:
Any adult using exercise equipment should ensure that children are not in the vicinity when the unit is in use.
Any children using equipment should be supervised by an adult at all times.
The unit when not in use still represents a danger to unsupervised children, the unit should be moved so it cannot
be accessed by them or the unit should be rendered inoperable.
SAFETY
The back inverter is intended to be used only as a therapeutic device.
It is recommended that a second person be present when using the back inverter as a safety
precaution until you become familiar with it’s operation.
Avoid wearing loose clothing and always wear shoes with think socks to pad the ankles.
Check that the unit is assembled correctly before each use.
(b)
Fitness Specialists
(a)
(b
(c)
(d)
