BEER GN 3/1 Operating Instructions & Installation Instructions Download Page 4

 

 

 

4

 

Introduction 

1.1 

Welcome 

With the purchase of your new Beer  Hot Rack you have chosen a product that combines the highest 
technical standards with practical service comfort. We recommend reading these operating and mainte-
nance instructions carefully in order to become familiar with the product quickly. 

With proper treatment  you  will  enjoy  this  appliance for a  long  time. Please keep  these  operating  and 
maintenance instructions to consult in case any maintenance and repairs are needed. 

We wish you successful business and much pleasure with the Beer Hot Rack. 

This operating and installation manual contains important basic information which needs to be consid-
ered during installation, operation and maintenance. Therefore, the operations manager and the opera-
tors must read the entire manual before the unit is installed and put into operation. The manual must 
always be kept close to the unit and easily accessible. 

 

 

Beer Grill AG cannot assume any responsibility or warranty obligations for any damage 
sustained due to non-adherence to the installation and operating instructions or due 
to improper use.

 

1.2 

Symbols used 

 

 

This symbol indicates important references for the proper use of the unit. Not paying 
attention to these references can lead to malfunctions of the unit or adverse effects 
to the environment. 

 

 

 

Attention hot surface! Indicates a possibly dangerous situation due to hot surfaces. 
Failure to observe the instruction may result in burns and / or damage to property. 

 

 

 

This symbol indicates potential or direct danger to the life and health of persons and 
/ or a possibly dangerous situation. Ignoring these notices may result in dire conse-
quences for your health and / or can lead to property damages! 

 

 

 

This symbol points to operation tips and especially useful information. Helps you to 
use all functions on your unit optimally. 

 

 

 

This symbol indicates references to materials or operating media that must be han-
dled and / or disposed according to legal standards and regulations. 

 

Summary of Contents for GN 3/1
























Reviews: