BEER Beer Hot Cube, Operating Instructions Manual, Page: 10 / 26

10
7 Packing
Before commissioning, completely remove the external and internal packaging material from the
device.
If you wish to dispose of the packaging, observe the regulations in force in your country.
Recycle recyclable packaging materials.
Please check that the device and its accessories are complete. If any part should be missing, please
contact our customer service.
8 Set up
The following points must be observed when setting up the appliances:
+
Solid substructure
The appliances are self-supporting. The substructure should have the same basic dimensions as
the appliance.
+
Ambient temperature
The appliances are equipped with electronic components that are ventilated. Therefore do not place
any heat producing apparatus nearby (Griddle, Bainmarie, etc.).
+
Built-in units
The appliances may only be installed by qualified and authorized experts. The exact installation
instructions can be found in the appendix.
When installing units in a niche or cut out of a table top you have to assure the airflow of the forced
air-circulation. For handling and thermal reasons we recommend the first version.
+
Location and storage
The appliances contain electronic components that may not be stored in cold and humid areas.
Make sure that no condensate water can form during storage.
If an appliance has been out of service for a prolonged time and has been stored in a cool or humid
area, it must be thoroughly checked before restarting.
Contact with salt water is strictly forbidden. If an appliance is installed at a swimming pool, it is
essential to assure that the equipment does not get in contact with substances containing chlorine
or acids that may affect the anti-corrosive protection of the metal construction.
Attention, stainless steel is not totally resistant to substances containing chlorine or
acids. These may corrode the equipment's materials. The appliances must not get in
contact with such substances!