Beem Pyramid A4, User Manual

Page: 22 / 106

18
Pyramid A4 EN
BEEM - Elements of Lifestyle
No claims of any kind will be accepted
for damage resulting from use of the
appliance for other than its intended
purpose.
The risk must be borne solely by the
user.
Requirements for the
place of use
For safe and trouble-free operation of
the appliance, the installation location
must satisfy the following require -
ments:
Place the appliance on a stable,
■
level, heat resistant surface that is
also resistant to splashing water.
Do not install the appliance in a
■
hot, wet or very humid environ-
ment.
The mains socket must be easily
■
accessible and allow fast discon-
nection in the event of an emer-
gency.
The surface finishes on furniture
■
may contain substances that can
be detrimental to the feet of the ap-
pliance. If necessary, place a mat
under the feet of the appliance.
During operation, make sure that
■
no valuable object or objects sen-
sitive to damp or heat are located
in the vicinity of the appliance in
order prevent damage from hot
steam and water.
Do not install the appliance under
■
a wall cabinet.
Never place the appliance or parts
■
of the appliance in the vicinity of
strong heat sources and hot sur-
faces (e.g., heating, oven, grill)
.
Select a location that does not al-
■
low children to reach the hot sur-
faces of the appliance.
Do not lay tablecloths, cloths or
■
serviettes under the feet of the ap-
pliance, the appliance could slide
away.
In order to prevent someone from
■
pulling the cable, make sure the
mains cable does not hang down
The appliance may not be used or
■
stored outdoors.
Electrical connection
For safe and trouble-free operation of
the appliance, the following instruc-
tions on the electrical connection must
be be observed:
Before connecting the appliance,
■
compare the connection data (volt-
age and frequency) on the rating
plate with those of your mains
power supply. This data must cor-
respond in order to avoid damage
to the appliance. If in doubt, ask
your electrical appliance retailer.
The mains socket must be protect-
■
ed by at least a 16 A fuse.