Beem M14.001, User Manual

Page: 20 / 56

20
EN Schneid-FiXX
BEEM - Elements of Lifestyle
Operating
Insert/remove attachment
(see image A)
Insert the attachment into the fixture
‹
(2) so that the feed shaft (6) is situated
above the symbol on the drive unit.
Turn the attachment anticlockwise until
‹
the feed shaft (6) is situated above the
symbol on the drive unit. The feed
shaft snaps in audibly.
To remove, turn the attachment an-
‹
ticlockwise until the feed shaft (6) is
situated above the symbol on the
drive unit.
Inserting/removing the grater
(see images B and C)
Push the desired grater into the mount-
‹
ing until it stops (7).
Turn the grater anticlockwise until it
‹
stops. The grater does not snap in but
is pulled inwards and fixed into place
during operation.
To remove, simply turn the grater anti-
‹
clockwise.
WARNING
The slicers are very sharp!
Only grip the grater at the plastic ►
parts.
Inserting/removing the splash
guard (see image D)
Insert the splash guard (14) with the
‹
locking elements into the notches of
the appliance.
Lock the splash guard by turning it an-
‹
ticlockwise.
Using the appliance
Insert the attachment first, then the
‹
desired grater followed by the splash
guard.
Insert the plug into the mains socket.
‹
Press the ON/OFF button to start the
‹
appliance and fix the grater.
Switch off the appliance.
‹
Put a suitable container under the
‹
spout.
Cut the ingredients into pieces to fit into
‹
the feed shaft.
Press the ON/OFF button to switch on
‹
the appliance.
Remove the pusher.
‹
Put the ingredients into the feed shaft
‹
Insert the pusher into the feed shaft
‹
and press it downwards lightly. This
pushes the ingredients into the grater.
NOTE
The straight surfaces of the pusher ►
point forwards, the rounded point
backwards.
After using
Press the ON/OFF button to switch off
‹
the appliance and wait until the motor
stops moving.
Pull the plug out of the mains socket.
‹
Clean the appliance and the accesso-
‹
ries as described in the Cleaning and
care
section.