Beem i-Turbo, User Manual

Page: 24 / 80

24
i-Turbo Akkusauger 2 in 1 EN
BEEM - Elements of Lifestyle
Requirements for the place of use
For safe and trouble-free operation of the
appliance, the installation location must
satisfy the following requirements:
The mains socket must be easily ac- ■
cessible and allow fast disconnection
in the event of an emergency.
Do not operate the charging station in
■
a hot, wet or very humid environment.
Electrical connection
For safe and trouble-free operation of the
appliance, the following instructions on
the electrical connection must be be ob-
served:
Before connecting the appliance, ■
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. This
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
The mains socket must be protected
■
by at least a 10 A automatic circuit
breaker.
Make sure that the power supply unit
■
and the charging cable of the power
supply unit is undamaged and are not
laid over sharp edges.
The mains cable must not be pulled
■
tightly, bent or come into contact with
hot surfaces, sharp edges or chemi-
cals.
Route the charging cable of the power ■
supply unit so that there is no risk of
tripping.
The electrical safety of the appliance
■
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.