Before each use, always inspect the product to ensure there is no damage to the
power cord, the control, or the pad.
The pad connector and control connector are designed to connect only one way.
Align the inner prongs and then push together until connectors are touching
Check with your healthcare provider before using with a pacemaker or any medical
device.
Do not plug into the wall outlet until you have connected the controller cord to the
product.
Turn the product off by pressing the button and unplug it when it is not in use.
CONTROLLER COMPONENTS & FUNCTION DESCRIPTION
1 - Display
2 - ON/OFF Button
3 - Time Setting Button
4 - + and - Buttons
• Turn on with the switch button, the
default level is the standby level 01,
press the "+" "-" button to regulate
the setting up to level highest 06.
• Press the time setting button, the display lasts for
2.0 hours by default, press the "+" "-" button to
adjust the timing, If there is no operation after
flashing for 3 seconds, it will return to the previously
set heating level.
• Press the "+" and "-" buttons to adjust the heating level
（
01-02-03-04-05-06
）
and the timing
（
1.0-1.5-2.0)H.
AUTO SHUT OFF MODE
This product will turn off after a set duration of time. Setting times have 1.0, 1.5 and 2.0
Hours. WARNING: Burns can occur regardless of the control setting; check skin under
Pad frequently. Unplug the product when it is not in use.
CAUTION
ϰ
dŚŝƐ ŚĞĂƚŝŶŐ ƉĂĚ ŚĂƐ Ă ƉŽůĂƌŝnjĞĚ ƉůƵŐ ;ŽŶĞ ďůĂĚĞ ŝƐ ǁŝĚĞƌ ƚŚĂŶ ƚŚĞ ŽƚŚĞƌͿ ĂƐ Ă ƐĂĨĞƚLJ
ĨĞĂƚƵƌĞ͘ dŚŝƐ ƉůƵŐ ǁŝůů Ĩŝƚ ŝŶƚŽ Ă ƉŽůĂƌŝnjĞĚ ŽƵƚůĞƚ ŽŶůLJ ŽŶĞ ǁĂLJ͘ /Ĩ ƚŚĞ ƉůƵŐ ĚŽĞƐ ŶŽƚ Ĩŝƚ
ĨƵůůLJ ŝŶƚŽ ƚŚĞ ŽƵƚůĞƚ͕ ƌĞǀĞƌƐĞ ƚŚĞ ƉůƵŐ͘ /Ĩ ŝƚ Ɛƚŝůů ĚŽĞƐ ŶŽƚ Ĩŝƚ͕ ĐŽŶƚĂĐƚ Ă ƋƵĂůŝĨŝĞĚ
ĞůĞĐƚƌŝĐŝĂŶ͘ K EKd ddDWd dK &d d,/^ ^&dz &dhZ͘
WĂƌƚƐ
ϭ͘ ,ĞĂƚŝŶŐ WĂĚ
Ϯ͘ WĂĚ ŽŶŶĞĐƚŽƌ
ϯ͘ ŽŶƚƌŽů ŽŶŶĞĐƚŽƌ
ϰ͘ ŽŶƚƌŽů
ϱ͘ WŽǁĞƌ ŽƌĚͬWůƵŐ
