Edge Strip
4b (Top Back rail)
4a (Top Back rail)
9 (Division Panel)
Edge Strip
Edge Strip
9 (Division)
16
16
16
16
17
17
Step 6
Assembling the division
Please lay down the division panel (9)
on a flat protected surface and insert
the cams (16) in the holes as shown.
Make sure to push cams (16) all the way
in by gently tapping them with hammer.
Screw in the hardware pins (17) in the
holes shown.
Step 7
Assembling division with
the unit
CAUTION: Assembly by two
persons recommended
Making sure that the edge strip
of the division panel (9) face
towards the front of the unit,
and hardware pins in the
division panel (9) align with
the holes in fix shelf, carefully
push the top shelf away from
the unit (slightly) and place the
division panel between the top
and bottom. Align the hardware
pins in the holes in the fix shelf
and hardware pins in the bottom.
Once aligned, release the top
and insert the hardware pins in top
into the division. Lock all the cams
(16) in place by rotating the cams
in clockwise direction through 180
o
.
Step 8
Inserting large wooden dowels and
rail
Please align together the holes in top
back rail (4a) and division panel (9)
and gently hammer in the large wooden
dowels (21) through the hole in the
division panel (9) to the top back rail (4a).
Insert the other top back rail (4b) on the
dowels with edge strip facing toward the
bottom of the unit.
Page 6 of 10