© BECOM Systems 2020
15
|
30
Hardware User Manual - Argos3D - P33x
Last change: 29 June 2020/Version 12
No.
Signal
Type
Description
1
IN2A
I (0V to 50V)
Opto-coupler contact A
2
IN2B
I (0V to 50V)
Opto-coupler contact B
3
IN1A
I (0V to 50V)
Opto-coupler contact A
4
IN1B
I (0V to 50V)
Opto-coupler contact B
Table 4-2: General purpose input 1 & 2 connector description
An optocoupler SFH6286-2T from Vishay is used for each general purpose input.
OFF-Range: 0V to 2V.
ON-Range: 5V to 50V.
4.3.4
General purpose output 1 & 2 (d)
This 4 pole 3.5mm terminal connector allows plugging a cable entry plug like
691361100004
from Würth Elektronik.
No.
Signal
Type
Description
1
OUT1A
SPST-A
Relay contact A
2
OUT1B
SPST-B
Relay contact B
3
OUT2A
SPST-A
Relay contact A
4
OUT2B
SPST-B
Relay contact B
Table 4-3: General purpose output 1 & 2 connector description
A solid state relay ASSR-3210 from Avago Technologies is used for each general purpose output.
Maximum voltage: 250V.
Maximum current: 200mA.
4.3.5
Trigger (f)
This 3 pole, 3.5mm terminal connector allows plugging a cable entry plug like
691361100003
from Würth
Elektronik.
