Recalling Results by Run Date/Time
Introduction
Results Recall
UniCel DxC Systems Instructions For Use A13914
Page 8-6
October 2005
Recalling Results by Run Date/Time
Introduction
Results can be recalled by Run Date and/or Time.
Recalling by Run Date/Time
Follow the steps below to recall results by Run Date and/or Time.
Step
Action
1
Select the Results icon from the menu bar.
2
From the Recall Results By screen, type the desired date and time ranges in
the From fields and To fields.
3
Select a function button from the bottom of the screen to select a desired
output option.
• Results [F1] - to view results on the screen.
• Sum [F7] - to send statistical summary to printer.
• Host [F8] - to send results to the host.
• Print [F10] - to send results to a printer.
Table 8.1
Date and Time Formats with Recall Results
Field
Entries
Notes
Date
1–12 mm
1–31 dd
0–99 yy
• An entry in the From field is required.
• If only a From date is entered, the
results are recalled for that date.
Time
(12-hour format)
1–12 hh
0–59 mm
AM/PM
• The time format is defined in Setup as
12-hour or 24-hour.
• The 12-hour default is AM.
Time
(24-hour format)
0–23 hh
0–59 mm
• If no time interval is entered, the results
are recalled for the Date(s) entered in
24-hour interval(s).
