Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 163 / 498

A13914AF
4-31
Reagent Load/Calibration
Reprint Calibration Reports
4
4
Move cursor to the slope and/or offset to be modified.
OR
Press
(
Page Up
)
or
(
Page Down
)
from the keyboard or use the screen scroll bar to locate the
Chem. Type the desired value in the appropriate
Slope
and
Offset
fields.
•
If a previously modified slope or offset is to be returned to the original default value for that
calibrator or chemistry, select desired chemistry, move cursor to the applicable field and
select
Restore Defaults
.
5
Select
Close
to exit screen.
Reprint Calibration Reports
Introduction
The five most recent calibration reports for a given calibrator (chem position) may be printed for
an historical perspective.
Reprint Current Calibration Reports
1
Select
Rgts/Cal
from the menu bar.
2
Select the chem position(s) to print.
NOTE
When requesting reports of recent MC calibrations, select only one chemistry per report format.
This prevents duplicate copies. For example, if NA is selected, the report contains all five ISE
chemistries.
3
Select
Options F6
.
4
Select
Print Cal Report
from the pull-down menu.
5
Select
Current Cal Report
from the
Print cal report
dialog box. The report(s) automatically prints.