Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 135 / 498

A13914AF
4-3
Reagent Load/Calibration
Reagent Load
4
Sort Reagent Status
The order in which CC reagents are shown on the
Reagent Status/Calibration Status
screen can vary
according to operator selection.
1
Select
Rgts/Cal
from the menu bar.
2
Press
(
Page Up
)
or
(
Page Down
)
to go to pages 3–8.
3
Select
Sort F9
. A dialog box appears.
4
Select the sorting option in which the CC Chems should be shown.
•
Position (on reagent carousel).
•
Chemistry (Lists CC Chems alphabetically. The oldest cartridge is listed on top, for multiple
carts of the same Chem.)
•
Days Left (onboard stability or expiration date, whichever comes first).
•
Tests Left (number of tests left in cartridge).
•
Cal Time Left (oldest Cal date listed first).
NOTE
The option selected is shown in ascending or alphabetical order. When the sorting option is
selected, the sorting order is retained until the operator changes it.
Level Pending Reagent cartridge has been loaded and is waiting to be level-sensed.
Level Sense Error Level sense check failed to properly detect reagent in one or more
compartments.
n/a Reagent status is not applicable for this chemistry (for example, an
electrolyte chemistry).
Table 4.1 Reagent Status Messages (Continued)
Message Explanation