Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 113 / 498

A13914AF
3-15
System Setup Options
Panels
3
Select
Immediate Report of Critical Rerun
to send to the Host and/or printer any Critical Result
Rerun as soon as it is completed.
Select
Immediate Report of Serum Index
to send to the Host and/or printer any Serum Index result
as soon as it is completed.
Chemistries that are not complete at the time of interim STAT or ALL reports are designated by the
message
Results Not Available
in place of results. The report includes any results that are complete
at the time the report is generated. A final report with all results is printed upon completion of the
sample.
Panels
Introduction
The Panels option allows grouping of analytes commonly programmed and run together.
Defining, Editing and Deleting Panels
The operator may define a maximum of 50 panels, and must assign a unique name to each.
From the
Setup
screen, select
6 Panels
to show the
Panel Summary
screen, then select
Define F1
to
define, edit or
Delete F2
to delete panels.
Panel definitions may be viewed and modified at any time.
Selecting a Default Panel
The operator may select one of the defined panels as the Default Panel. The DxC system selects the
Default Panel as the test(s) to run when the sample ID has no programming assigned, or after a Host
Query time-out.
From the
Setup
screen, select
6 Panels
. From the resulting
Panel Summary
screen, select the panel
that you want to serve as the default and press
Default F3
. The ">" character shows to the left of the
selected Default Panel.