Beckman Coulter UniCel DxC 600, Instructions For Use Manual, Page: 112 / 498

A13914AF
3-14
System Setup Options
Demographics Setup
IMPORTANT
Changes to system date and/or time may affect reagent expiration date, calibration, quality
control data, within-lot calibration status, and on-board stability dates for reagents.
Demographics Setup
Introduction
The Demographics Setup option provides the ability to select the demographics fields that appear
in the demographics display/printout of the Program Samples function.
Setup
From the
Setup
screen, select
4 Demographics Setup
to enable, disable and restore defaults to
demographic fields.
To change demographic field settings, the system must be in Standby , Stopped, Startup, Instrument
Down,or Homing .
The system default is
ALL
demographics fields shown.
Patient Results – Immediate Reporting Setup
Introduction
Use Immediate Report to configure the system to print and/or send results to the Host as they are
completed on the system. When these options are not selected, test results are not printed or sent
to the Host until all tests are completed for the sample ID.
Immediate Patient Results Reporting to Host and/or Printer
From the
Setup
screen, select
5 Immediate Report
to change settings for Immediate Reporting.
To change Immediate Reporting settings, the system must be in Standby , Stopped, Startup,
Instrument Down, or Homing
.
The default is all immediate reporting disabled (no boxes checked).
Select
STAT
in the Host section to send to the Host all MC chemistries programmed as STAT as soon
as they are completed. Select
ALL
in the Host section to send to the Host all MC chemistries as soon
as they are completed, whether or not they are programmed as STAT.
Select
STAT
in the Printer section to print all MC chemistries programmed as STAT as soon as they
are completed. Select
ALL
in the Printer section to print all MC chemistries as soon as they are
completed, whether or not they are programmed as STAT.