manualshive.com logo in svg

Beckman Coulter Navios, Instructions For Use Manual, Page: 533 / 586

Share
Download
Beckman Coulter Navios Instructions For Use Manual Download Page 533

773232AH 

B-3

Maintenance And Service Logs

Maintenance Log     

B

 •

Save - 

Saves a new entry on the Maintenance Log. 

 performs the same function.

 •

Exit - 

Exits the Maintenance Log. 

 performs the same function.

Admin

Prompts for the Navios Administrator password. 

 performs the same function.

Legend

Displays a legend that shows the list of user names and the corresponding color used for the visual 

display. 

 performs the same function.

Help

Displays the Maintenance Log help. 

 performs the same function.

Using The Maintenance Log

The system automatically assigns letter "A" to the Administrator and assigns a unique color and 
letter to all other users.  The color assignment is used for visual display and the letter assignment is 
used for printing. The letter legend is printed with the log.  The pre-assigned letter "A" for 
Administrator is used for both the visual display and the printout.

User Entry

Double-click on a box for the current date to indicate that you have performed the specified action. 

You can erase your own entry for the current date by clicking on the box again. You cannot change 
entries for other users or previous dates.

To enter a comment on any of the boxes, right-click on the box and select 

Insert

 

Comment

.

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Reviews:

No comments