Beckman Coulter Navios, Instructions For Use Manual

Page: 43 / 586

773232AH
1-5
Use And Function
Material Safety Data Sheets (MSDS)
1
Material Safety Data Sheets (MSDS)
To obtain an MSDS for Beckman Coulter reagents used on the Navios Flow Cytometry System:
1.
On the internet, go to http://www.beckmancoulter.com and select
MSDS
from the
Customer
Support
drop down menu.
2.
If you do not have internet access:
•
In the USA, either call Beckman Coulter Customer Operations (800-526-7694) or write to:
Beckman Coulter, Inc.
Attention: MSDS Requests
P.O. BOX 169015
Miami, FL 33116-9015
•
Outside the USA, contact your Beckman Coulter Representative.
CYTO-TROL Control Cells Lyophilized lymphocytes with assay values for specific surface antigens.
Used to assess monoclonal antibody function and verify proper flow
cytometer setup.
IMMUNO-TROL Cells Stabilized erythrocytes and leukocytes with a known quantity of surface
antigens. Used to verify monoclonal antibody performance as well as verify
the process of sample staining, lysing, and analysis.
IMMUNO-TROL Low Cells Stabilized erythrocytes and leukocytes with a known quantity of surface
antigens. Used to verify monoclonal antibody performance as well as verify
the process of sample staining, lysing, and analysis.
CYTO-COMP
Cell Kit
CYTO-COMP Cells stained with a single color are used to adjust color
compensation settings for multicolor analysis using monoclonal antibodies.
QuickCOMP 2 Kit Two single-color antibody reagents (FITC and PE) that can be used to adjust
color compensation on a flow cytometer.
QuickCOMP 4 Kit Four single-color antibody reagents (FITC, PE, ECD, and PC5) that can be
used to adjust color compensation on a flow cytometer.
Additional quality control reagents are available. Contact your Beckman Coulter representative or
access http://www.beckmancoulter.com.