Beckman Coulter Navios, Instructions For Use Manual

Page: 340 / 586

773232AH
10-144
Using Navios Software
Analysis Menu
Override runtime CAL Factor...
Check this option if you want to replay a batch of listmode files using a different Cal Factor.
Advanced
If your Administrator has assigned you access rights, the Advanced button is active and you can
enter and modify batch and count information. Enter the Product name , Expiry Date , Lot Number/ID
and CAL Factor. See Add Absolute Calibration Batches in the User Administration section.
ADD
Use the ADD button to enter new lot information (only available on the Advanced screen).
Replace
Use the Replace button to replace the selected information with updated values (only available on
the Advanced screen).
Delete
Use the Delete button to remove a selected lot from the list (only available on the Advanced screen).
Setting a CAL Region
Create a Region around the absolute count calibration particles, the region MUST be named CAL. Set
or select the calibration factor for the batch of beads in use from the
Analysis > Absolute Count
Calibration menu item.
NOTE
If the Cal Factor is set to 0 or there is no CAL Region present in the protocol, “Error” appears in the
Cells/uL field. If the number of events in the CAL region equal to or less than 1000, "Invalid" appears in
the Cells/uL field.
Calculate Results
This option calculates the statistics for all files selected on the screen.
Refresh
Selecting View > Refresh , or pressing
(
F5
)
, causes Navios software to refresh the screen, all plots
and FlowPAGEs. This option is useful when Windows fails to refresh the screen correctly leaving
some graphical errors visible.