Home
/
Beckman Coulter
/
Navios
/
Instructions For Use Manual

Beckman Coulter Navios, Instructions For Use Manual, Page: 282 / 586

Share

Page: 282 / 586

Beckman Coulter Navios Instructions For Use Manual Download Page 282

773232AH

10-86

Using Navios Software

Tools Menu

Panels can be created within this dialog, but cannot be used for acquisition. These listmode panels
are saved with a *.ppp extension.

NOTE

The Save button becomes active when one of the rows in the panel is highlighted.

The Parameter field indicates the Compensation parameter within the protocol.

The Status field allows a pause or stop between each file playback.

NOTE

Listmode Compensation must be performed using the runtime protocol or a protocol with equivalent

parameters as the runtime protocol.

Options Tab

This tab allows setting of default options for the Listmode Playback. Print options, publish
functions, file save naming options are set in this dialog box.

NOTE

If you playback a listmode file through 2 different protocols and have

selected, the PDF

file is saved after each playback with the same name. If you have the capability to overwrite files, the PDF
file will only have the information from the last playback.

File Sorting - In the Listcomp setup or Single file mode options, listmode files may be sorted using
the LMD File Listing option. This allows files to be sorted alphabetically, or by Time / Date modified.
Files may be Dragged and Dropped. Individual files may be selected and moved up or down the list
using the arrow buttons.

The start of each panel is indicated by an arrow.

«
...
280
281
282
283
284
...
»

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Reviews:

No comments