Beckman Coulter Navios, Instructions For Use Manual

Page: 281 / 586

773232AH
10-85
Using Navios Software
Tools Menu
10
This mode allows for single file or panel based listmode file playback, similar to acquisition of
samples.
A single panel may be selected; multiple copies of this panel may be run at a time. Tubes may be
added or removed from individual panels.
Load Queue loads a listmode queue file (a list of listmode files).
Regions may be Loaded or carried within a panel, AutoGating and positives analysis can be active on
any protocol within a panel
Where the source listmode file is a 20-bit data file, comp settings can be from the runtime protocol
(stored within the LMD file), from the Compensation settings file created in ListComp Setup or any
*.CMP file may be used.
During playback the title bar displays the current file being analyzed.
Optionally a new file may be saved containing newly compensated 10-bit data. The original LMD file
cannot be overwritten automatically.
Saved files have the suffix entered in the Options tab appended to each saved file.
List Comp Setup
This dialog provides an Acquisition Manager style worklist for the selection of a compensation
panel and associated protocols. *.ppp files created from the protocols used in the AutoSetup II
applications do not need the *_STAND protocol. These *.ppp panels allow you to replay their
associated LMD files to create *.cmp files.
NOTE
only one AutoSetup application *.ppp file may be selected at any given time.
The dialog is resizable by dragging the corners to the required size.
The settings file name defaults to the name of the panel but with a new *.cmp extension.
The Auto Save checkbox allows settings to be automatically written to the settings file that has the
name of the panel selected.