Beckman Coulter Navios, Instructions For Use Manual

Page: 238 / 586

773232AH
10-42
Using Navios Software
File Menu
User ID
When checked, this includes the User ID as part of the listmode file name.
Tube ID
When checked, this includes the Tube ID as part of the listmode file name.
Automatically add unique....
If a file already exists with the same name and extension, it automatically uses the next available
extension number. This option is only available when a user is not given data file overwrite
capability in the user access rights section of the Admin setup. Depending on User overwrite
privledges, if Tag # is selected and this option is not selected, LMD filenames may be overwritten.
Run Number
The system automatically generates an incrementing run number every time that a sample is run.
When this option is selected, the run number is included as part of the listmode file name – the
easiest way to ensure unique file names are always generated. If not selected, the run number is still
generated, saved and can be accessed in the FCS Header section of the file. The Run Number cannot
be de-selected unless one of the Sample ID’s or Tube ID are selected. De-selecting all the Sample IDs
and Tube ID check boxes results in Run Number being automatically selected.
Y2K Date
When selected, this option includes the date as part of the listmode file name. The format used is
the standard Year 2000 format (YYYY-MM-DD), showing when the sample was analyzed.
Time
When this option is selected, the time (HH-MM-SS) that the sample was analyzed is included as part
of the listmode file name.
NOTE
The Listmode File Name column displays only a provisional file name prior to acquisition. If Time or
Run Number is included as part of the name the actual value of these fields can only be determined once
acquisition of each sample is complete. Therefore, if you wish to print a worklist including the final
listmode file names, only do so once acquisition of all samples in the Worklist is complete.
Tag Number
This allows you to choose whether the Tag number should be included as part of the listmode file
name. If this option is selected, it activates the following items:
•
Start each Panel at 001
This starts the Tag Numbering option from 001 for each new panel.
•
Start At
This starts the Tag Numbering option from any number that you require, and continues
incrementing until manually reset.