Beckman Coulter Microfuge 20 Series, Instructions For Use Manual

Page: 57 / 74

B30162AA 4-1
CHAPTER 4
Care and Maintenance
Introduction
For maintenance not covered in this manual, contact Beckman Coulter Field Service. User messages are
discussed in
CHAPTER 3, Troubleshooting . Refer to the applicable rotor manual and to
Chemical Resistances (publication IN-175) for instructions on the care of rotors and their accessories.
NOTE
It is your responsibility to decontaminate the centrifuge, as well as any rotors and accessories, before
requesting service by Beckman Coulter Field Service.
WARNING
Any maintenance procedure or servicing of this equipment that requires removal
of any covers can expose parts which involve the risk of electric shock or personal
injury. Make sure that the power switch is off (O) and the centrifuge is
disconnected from the main power source by removing the Mains (power) plug
from the outlet receptacle and refer such servicing to qualified service personnel.
Do not use alcohol or other flammable substances in or near operating
centrifuges.
WARNING
Risk of personal injury or contamination. If you do not properly shield yourself
while performing service, maintenance, and troubleshooting procedures, residual
fluids in the instrument could injure or contaminate you. Beckman Coulter
recommends barrier protection, such as appropriate safety glasses, lab coat, and
gloves, be worn throughout the performance of service, maintenance, and
troubleshooting procedures to avoid contact with cleaners and/or residual fluids
in the instrument.
The centrifuge, rotor and accessories are subject to high mechanical stresses. Thorough and
diligent maintenance performed by the user extends the service life of the centrifuge and prevents
premature failure.
NOTE
If corrosion or other damage occurs due to improper care, the manufacturer cannot be held liable or
subject to any warranty claims.See the Beckman Coulter, Inc. Microfuge 20 Series Centrifuge Warranty .