Displaying the QC File List
Introduction
Quality Control
IMMAGE 800 Operations Manual A11403
Page 9-20
September 2016
Displaying the QC File List
Introduction
The operator can display and/or print a list of QC files by control name, chemistry
name, or QC File number.
A QC File is a grouping of control information for a particular chemistry in a
particular control (e.g., control lot number, mean, SD, cumulative sums).
A QC File number is the unique number assigned by the operator to identify a
particular QC File. (Refer to Defining a Control in this chapter.)
Displaying QC File Lists
Follow the steps below to list QC files.
Step
Action
1
Select
QC
from the menu bar.
2
Select a number beside a defined control. If a Control Name is not
selected, the QC File List by Control Name is displayed with all defined
controls.
3
Select
QC File List [F4]
4
Select...
to display the QC list by...
List CtlName [F1]
Control name
List File [F2]
File number
List SelChem [F3]
Selected chemistries. Choose the
chemistries and select
<OK>
to display
the QC List
OR
Select
<Cancel>
to exit without
displaying the QC List.
List All Chem [F4]
Chemistry name in alphabetical order
5
Select
Print [F10]
to print the File List.
OR
Select any icon from the menu bar to exit.
