Beckman Coulter CEQ 8000, User Manual

Page: 300 / 382

Fragment Analysis Procedures
286 CEQ™ 8000 Genetic Analysis System
Customizing the Results List
The components of the results lists are user-defined and can be modified through
commands available in the right-click menus. These commands allow you to select
specific columns for display in the results list, customize the arrangement of
information, add or remove columns and modify several other parameters of the
results displayed. Customized lists are available in the Result Set View, the Fragment
List, AFLP and Peak Ratio tables.
Selecting Columns for Display
The Column Selector window contains a list of all possible columns that can be
displayed in the list. These columns can be selected individually or in groups, they can
be arranged in any order and can be locked so that they always remain in view when
scrolling through the fragment list.
Accessing the Column Selector window
• Right-click on the column header area of the list to display the pop-up menu.
• Select the
Select Columns
command.
• The
Column Selector
window will be displayed.
Figure 157:Column Selector window - Selecting columns for display in the table
The columns available for display are determined by the application
area in which the Column Selector window is accessed (i.e., Result Set
View, Fragment List or AFLP Cluster Analysis).
Refer to the Online Help for detailed descriptions of the available
columns and their use.