Beckman Coulter CEQ 8000, User Manual

Page: 201 / 382

Setting or Changing Display Options
User’s Guide 187
Setting or Changing Dye Trace Displays
To set or change the dye trace properties, perform the following steps.
1. Double-click the mouse button in the Raw or Analyzed data panes.
2. In the
Display Options
dialog box, select the
Dye Traces
tab.
3. Select the traces, to display or not display, under
Show Dye Traces
.
4. To change a color of any dye trace, click on the appropriate
Dye Colors
dye,
select a color from the
Color
dialog box and then click
OK
.
5. When finished with Dye Traces, select
Apply
to continue or
OK
to close the
Display Options
dialog box.
Setting or Changing Current Trace Displays
To set or change the current trace options, perform the following steps.
1. Double-click the mouse button in the Current or Voltage data panes.
2. In the
Display Options
dialog box, select the
Current Traces
tab.
3. Select the radio button for the current type to display under
Data
. Click
OK
.
From the
Run
module:
1. Select
Tools | Display Options
.
2. Select the
Current Traces
tab.
3. To view the total current for the run, check the
Total Current
check box. To
display current for individual capillaries, check the appropriate check boxes. Click
OK
.
Setting or Changing Color Options
To define the color options of the window, the current traces, the voltage trace or the
optical scan trace, perform the following steps.
1. Double-click the mouse button in the Instrument Data or Data Monitor panes.
2. In the
Display Options
dialog box, select the
Colors
tab.
3. Change any item as desired and then select
Apply
to continue or
OK
to close the
Display Options
dialog box.
Changing Raw Data Colors
To display the Raw Data Colors toolbar, select View | Toolbars from
the menu. Select the desired toolbar options and click Close.
To change the colors of the raw data traces, perform the following steps.
1. On the
Raw Data Colors
toolbar, click on the trace color to change
(
A
,
C
,
G
or
T
for Sequence Analysis and
D1
,
D2
,
D3
, and
D4
for Fragment
Analysis).
2. In the
Color
palette dialog box, select the new color and then click
OK
.