Beckman Coulter Avanti JXN-26, User Manual, Page: 70 / 210

PN B38322AA 4-4
Configuration
Managing Users
2
Select
Options
to display the
System Options
page.
3
Select the
Network
Tab, then select
Setup VNC
to display the
Setup VNC
page.
4
Select the Enable or Disable VNC Server
Enable
button to enable the VNC server. The button
displays a green square when the option is enabled.
5
To use the PIN of the current user as the VNC password, select the Synchronize VNC Password
To Logged in User PIN
Enable
button. To enter a separate VNC password, select
Set Password
.
Enter and confirm the password and select
OK
to save and return to the
Setup VNC
page.
6
Select
Back
to return to the
System Options
page.
Enabling API
Use this option to allow a remote device to connect to the instrument using the API.
1
Select the
Menu
Button on the Header Bar to display the
Menu
page.
2
Select
Options
to display the
System Options
page.
3
Select the
Network
Tab, then select
Enable API
. The button displays a green square when the
option is enabled.
NOTE
This button is only active when Require Login is enabled and you are logged into the system as
an Administrator.
4
Select
Done
to return to the
Home
page.
Managing Users
You can require users to log in prior to using the Avanti JXN series. You can use the login to build a
run log for each user, and to control access to the system.
The system includes three user levels that grant different ranges of system access.