B00418AA
6-35
As Needed Tasks
6.11 Reagent Inventory
6
4
Select the start index and the end index from each drop-down list.
5
Select
OK
. The number of tests selected within the index range is
displayed on the list.
6
S
elect
R1 Volume
or
R2 Volume
. The reagent consumption is
automatically calculated based on an actual result and then displayed
on the list by mL.
The reagent consumption is calculated by the following formula:
Actual result * (the amount of reagent disp the amount of
surplus dispensing).
7
Select
Auto
from the “Decision” drop-down list. The calculated
reagent consumption is set as the required reagent volume indicator in
Reagent Management
.
6.11.2 Manual Calculation of Reagent Inventory
1
Select
Home > Reagent Management > Reagent Inventory >
Manual
.
2
Select
Edit (F1)
. The window changes to the edit mode.
3
Select
Serum
,
Urine
,
Other-1
or
Other-2
from the "Type" drop-down
list.
4
Enter the number of tests run for each test for each day of the week.
B00418AA_AU5800 QRG_EN.book Page 35 Monday, December 13, 2010 9:59 AM
