Beckhoff TwinSAFE EL6910, Operation Manual

Page: 76 / 144

Operation
EL6910 76 Version: 1.8.0
4.4.9.9 Names of Alias Devices in the process image
The user has now the option of adapting the naming of process data below the TwinSAFE logic in the I/O
tree. For this purpose, checkboxes are available on the
Target System dialog to accept the naming of
TwinSAFE connections and standard inputs and outputs from the respective Alias Device names.
Fig. 86: Properties under Target System
After the checkboxes are set, the names of the alias devices are taken.
Fig. 87: Take Alias Device Name - Safety Project
In the I / O tree below the TwinSAFE logic, the project is shown in the following screenshot. The name
consists of the group name, alias device name, and a running index.
Fig. 88: Take Alias Device Name - TwinSAFE logic process image