manualshive.com logo in svg

Beckhoff TF6120, Manual

Share
Download
Beckhoff TF6120 Manual Download Page 44

Configuration

TF6120

44

Version: 1.1

Step 2: Configuration of PLC-Variables for OPC-Conversion

With previous steps we defined a "conversion-Template" with detailed information about conversion
handling. Now we define, which PLC variable should be handled with conversion. Similar to the Data Access
feature, this configuration also occurs by adding comments to the PLC-project.

Beispiel: 

Please note:

Today just global PLC-variables can be linked to conversion-templates. Elements of structures or arrays can
not be configured as an OPC-conversion.

4.1.5

Simulation

4.1.5.1

Configuration of OPC-Simulations

The OPC-Server offers to simulate process-values. In this case no communication to the ADS-device (like
PLC) is done instead simulated values are send to OPC-client.
Different simulation templates like sinus, ramp, random etc. are available to be configured with detailed
behaviour (amplitude, start /stop values).

The OPC-Server offers:

• simulation of all process values

• simulation of some specific process values

Please note: 

It is not possible to combine both simulated and real-process values.

The 

complete sample

 contains both, the PLC project and the definition of OPC-simulation.

The usage of OPC-Conversions needs the configuration of a TPY-File (AutoCfgSymFile) for the
corresponding device and AutoCfg 8.

Step 1: Configuration of OPC-Simulation in OPC-Server

In the first step you need to configure TwinCAT OPC-Server for conversions. This is a one-time configuration
and does not need to be repeated when changes to the PLC project occur.

Start TwinCAT-OPC-Configurator 

"Start - All Programs - TwinCAT System - TwinCAT - TwinCAT OPC

Configurator"

Summary of Contents for TF6120













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands