Technical data, mounting, wiring
PS3031-2440-0000
25
Version: 1.0
3.14
EMC
The power supply is suitable without any restrictions for application in industrial environments as well as in
residential, commercial and light industrial areas and small businesses.
The device was tested according to EN 61000-6-1, EN 61000-6-2, EN 61000-6-3 and EN 61000-6-4.
EMC interference immu-
nity
Strong transients
VDE 0160
Over the entire load range
1550 V, 1.3 ms
EMC interference emis-
sion
According to the generic standards: EN 6100-6-3 and EN 6100-6-4
Conducted interference
emission, input lines
EN 55011, EN 55022, FCC Part 15, CISPR 11,
CISPR 22
Class B
Conducted interference
emission, output lines
IEC/CISPR 16-1-2, IEC/CISPR 16-2-1
5 dB higher than the AV limit
value curve for the DC power
connection according to
EN 61000-6-3
1)
Interfering radiation
EN 55011, EN 55022
Class B
Harmonic input current
EN 61000-3-2
Requirements for Class A
devices met
Voltage fluctuations, flicker EN 61000-3-3
Requirements met
2)
This device complies with FCC Part 15.
Operation is subject to the following two conditions:
• This device must not cause adverse interference, and
• This device must tolerate any interference it is subjected to, including interference that may cause
undesired operation.
1)
Restrictions apply to residential, commercial and light industrial applications as well as to small businesses
involving local DC networks according to EN 61000-6-3. No restrictions for all types of industrial applications.
2)
Tested with constant current loads, non-pulsating
