Beckhoff KL6811, Documentation

Page: 29 / 60

Configuration software KS2000
KL6811 29 Version: 2.0.0
Fig. 19: KS2000 - parameterization of the DALI/DSI devices - lighting control / queries
Indirect light control (control via the indirect DALI commands [ } 53] for lamp power)
Buttons that send an associated DALI command to the selected device are available for the main functions.
Switching off
Switches off the lamp connected to the DALI device without fading (sends DALI command 0 [ } 53]
dec
).
Down
Dims the DALI device over a period of 200 ms using the selected fade rate [ } 32] (sends DALI command 2
[
}
53]
dec
)
Up
Brightens the DALI device over a period of 200 ms using the selected fade rate [
}
32] (sends DALI
command 1 [
}
53]
dec
)
Step Down
Lowers the current lamp power value by one graduation without fading (sends DALI command 4 [
}
53]
dec
),
assuming the lamp has not already been set to its parameterized minimum (MIN) value. If the lamp has
already been set to its MIN value, it is not changed, and remains switched on. The minimum value can be
parameterized on the
Variables [ } 31] tab.
Step Up
Sets the current lamp power value one graduation higher without fading (sends DALI command 3 [ } 53]
dec
),
unless it is already switched on. If the lamp is switched off, it is not switched on.