Beckhoff KL3361, Documentation

Page: 33 / 70

Configuration software KS2000
KL3361 and KL3362 33 Version: 2.2.0
4.3 Masks for KL3361
4.3.1 Trigger logic for KL3361
In the Trigger logic tab, you can specify the trigger behavior of the KL3361 oscilloscope terminal.
Fig. 17: Trigger logic for KL3361
• Source
Here you can select the trigger source (see Trigger logic in detail [ } 40] ).
• Event
Here you can specify the trigger event (see Trigger logic in detail [
}
40] ).
• Enable
Connect the lower input of the And gate with the desired function in order to specify when the And gate
should switch through a trigger pulse (see
Trigger logic in detail [
}
41] ).
• Action
Connect the output of the And gate with the desired function in order to specify which task should be
triggered (see
Trigger logic in detail [
}
41] ).
4.3.2 Trigger values for KL3361
In the Trigger values tab, you can set the mode, the scaling and the switching thresholds, the pulse width
and the valid trigger time for the two trigger units of the KL3361 oscilloscope terminal.