Fitting and wiring
FC5101 and FC5102
18
Version: 2.0
3.2.8
BK5151, FC51xx, CX with CAN interface and EL6751: D-sub,
9 pin
The CANbus cable is connected to the FC51x1, FC51x2 CANopen cards and in the case of the EL6751
CANopen master/slave terminal via 9-pin Sub-D sockets with the following pin assignment.
Pin
Assignment
2
CAN low (CAN-)
3
CAN ground (internally connected to pin 6)
6
CAN ground (internally connected to pin 3)
7
CAN high (CAN+)
The unlisted pins are not connected.
The mounting rail contact spring and the plug shield are connected together.
Note: an auxiliary voltage of up to 30 V
DC
may be connected to pin 9. Some CAN devices use this to supply
the transceiver.
Fig. 12: BK5151, EL6751 pin assignment
FC51x2:
Fig. 13: FC51x2
