Commissioning and configuration
EPP6228-0022
45
Version: 1.3
“Compare” button
1. Press the “Compare” button.
ð
the parameter data of the configuration are compared with the parameter sets in the sensor.
ð
The result is displayed in the “Parameter” tab see following figures.
Conformity of configuration and sensor data
The match is confirmed by a green tick in front of the index. Matching values are displayed in the “Value”
field (see index 0x0018 “Application Specific Tag”).
Fig. 26: Display of matching data in the “Parameter” tab
Deviations between configuration and sensor data
Deviations are indicated by a pen-symbol in front of the index. If there are different values in the “Value” field,
the value “Compare” is displayed (see Index 0x0018 “Application Specific Tag”).
Fig. 27: Display of deviating data in the “Parameter” tab
