Beckhoff EP9300-0022, Manual

Page: 13 / 67

Product overview
EP9300-0022 13 Version: 2.3
Additional checks
The boxes have been subjected to the following checks:
Verification Explanation
Vibration 10 frequency sweeps in 3 axes
5 Hz < f < 60 Hz displacement 0.35 mm, constant amplitude
60.1 Hz < f < 500 Hz acceleration 5 g, constant amplitude
Shocks 1000 shocks in each direction, in 3 axes
35 g, 11 ms
1)
This value corresponds to the current carrying capacity of the connector pins.
3.2.1 Profinet
Protocol
Profinet IO Device Yes
ADS Interface Yes
Services
IRT No
TCP/IP ADS Yes
Shared Device Yes
Prioritized start-up No
MRP Yes
SNMP Yes
LLDP Yes
ARP Yes
LLDP Yes
DHCP Yes
3.3 Scope of supply
Make sure that the following components are included in the scope of delivery:
• 1x EP9300-0022
• 1x protective cap for EtherCAT socket, M8, green (pre-assembled)
• 2x protective cap for Profinet socket, M12, black (pre-assembled)
• 1x protective cap for supply voltage input, M8, transparent (pre-assembled)
• 1x protective cap for supply voltage output, M8, black (pre-assembled)
• 10x labels, blank (1 strip of 10)
Pre-assembled protective caps do not ensure IP67 protection
Protective caps are pre-assembled at the factory to protect connectors during transport. They may
not be tight enough to ensure IP67 protection.
Ensure that the protective caps are correctly seated to ensure IP67 protection.