Commissioning
EL6652-00x0
106
Version: 2.5
This Ethernet/IP slave can handle a minimum of 5 ms (5000 µs); the manufacturer specifies a default value
of 20 ms. It is advisable to follow the manufacturer’s specification and to use the 20 ms. This means that a
"Cycle Time Multiplier" of 20 is to be entered (1 ms * 20 = 20 ms).
Specifying the data length
As the final step the data length must be entered; here again, the values are taken from the EDS file.
Assem102 corresponds to the output data, in the EDS file with 64 bytes; the green data correspond to the
bits, in total 64 bytes again. These values can be taken in the System Manager as a basis in order to use the
data just as they are represented in the EDS file. A byte array of 64 bytes can also be used, whose data are
broken down in the PLC.
