manualshive.com logo in svg

Beckhoff EL34 Series, Documentation

Share
Download
Beckhoff EL34 Series Documentation Download Page 96

Commissioning

EL34xx

96

Version: 1.5

Fig. 91: 

File OnlineDescription.xml created by the System Manager

Is a slave desired to be added manually to the configuration at a later stage, online created slaves are
indicated by a prepended symbol “>” in the selection list (see Figure 

“Indication of an online recorded ESI of

EL2521 as an example”)

.

Fig. 92: 

Indication of an online recorded ESI of EL2521 as an example

If such ESI files are used and the manufacturer's files become available later, the file OnlineDescription.xml
should be deleted as follows:

• close all System Manager windows

• restart TwinCAT in Config mode

• delete "OnlineDescription0000...xml"

• restart TwinCAT System Manager

This file should not be visible after this procedure, if necessary press <F5> to update

OnlineDescription for TwinCAT 3.x

In addition to the file described above "OnlineDescription0000...xml" , a so called EtherCAT cache
with new discovered devices is created by TwinCAT 3.x, e.g. under Windows 7:

(Please note the language settings of the OS!)
You have to delete this file, too.

Faulty ESI file

If an ESI file is faulty and the System Manager is unable to read it, the System Manager brings up an
information window.

Fig. 93: 

Information window for faulty ESI file (left: TwinCAT 2; right: TwinCAT 3)

Summary of Contents for EL34 Series








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands