Configuration
EK9500
41
Version: 1.0.0
Example configuration with EP1122 (2-port EtherCAT junction in protection class IP65)
The counting direction is to be observed when using an EP1122! It is comparable with the EK1122.
If EtherCAT junction 1 on the EP1122 is connected, then the EtherCAT frame is forwarded here first (1); if
junction 1 is not connected, the frame on junction 2 is sent (2), only after that does the sequence continue
with the EtherCAT connection on the right-hand side (3).
Fig. 35: Sample configuration with EP1122 (2-port EtherCAT junction in protection class IP65)
If neither junction is used, then junctions 1 and 2 are bridged, so to speak, and the EtherCAT frame goes
directly to the EtherCAT connection on the right-hand side.
No Hot Swap during operation
You cannot use the EP1122 and EK1122 on an EKxxxx for Hot Swap and also not for connection
and disconnection during operation. EP1122 and EK1122 are suitable only for topology extensions
(star) on an EKxxxx.
Summary of Contents for EK9500
Page 2: ......
