Product overview
EK9500
14
Version: 1.0.0
2.2
EK9500 - Introduction
Fig. 11: EK9500
The EK9500 Bus Coupler connects Ethernet/IP networks with the EtherCAT Terminals (ELxxxx) and
EtherCAT Box modules (EPxxxx) and converts the telegrams from Ethernet/IP to E-bus signal
representation.
One station consists of an EK9500 and EtherCAT Terminals. RJ45 is used for the Ethernet/IP connection. In
EtherCAT, the Ethernet/IP coupler has at its disposal a lower-level, powerful and ultra-fast I/O system with a
large selection of terminals. The coupler supports the EtherNet/IP protocol and therefore fits seamlessly into
Ethernet/IP networks.
Configuration
The EK9500 is configured based on HTML pages provided by the Bus Coupler or via the EtherNet/IP
interface.
Summary of Contents for EK9500
Page 2: ......
