Operation
EK1960
44
Version: 1.3.1
4.3.3.2
TwinCAT Safety Project Wizard
In the TwinCAT Safety Project wizard you can then select the target system, the programming language, the
author and the internal project name. Select the setting
Hardware
Safety PLC
as the target system and the
graphical editor as the programming language. The author and the internal project name can be freely
selected by the user.
Fig. 26: TwinCAT Safety Project Wizard
4.3.3.3
Target System
After creating the project with the Project Wizard, the safety project can be assigned to the physical EK1960
TwinSAFE controller by selecting the
Target System
node.
Fig. 27: Selecting the Target System node
The target system is set to EK1960 via the drop-down list and linked with the EK1960 controller via the link
button
next to
Physical Device
. If online ADS access to the controller is possible, the software version,
serial number, online project CRC and rotary switch address are automatically read from the controller. The
rotary switch address must correspond to the
Safe Address
set by the user.
Summary of Contents for EK1960 Series
