Beckhoff EJ6002, Documentation

Page: 18 / 60

EJ6002 - Product description
EJ6002 18 Version: 1.5
3.2 Technical Data
Technical data EJ6002
Technology Serial interface
Interfaces Individually selectable RS232, RS422 or RS485
Termination settings via software configuration
Data transfer channels 2
Data transfer rate 300 ... 256000 Baud (freely configurable)
Distributed Clocks -
Data buffer 864 byte receive buffer, 128 byte transmit buffer per channel
Electrical isolation 500 V (E-bus/field voltage)
Current consumption via E-bus 190 mA
Permissible ambient
temperature range during
operation -25°C ... +60°C
Permissible ambient
temperature range during
storage -40°C ... +85°C
Permissible relative air humidity 95 %, no condensation
Operating altitude max. 2,000 m
Dimensions (W x H x D) approx. 12 mm x 66 mm x 55 mm
Weight approx. 30 g
Mounting on signal distribution board
Pollution degree 2
Mounting position
Standard [
}
27]
Position of the coding pins
[
}
30]
2 and 5
Color coding grey
Vibration/shock resistance according to EN 60068-2-6/EN 60068-2-27 (with corresponding signal
distribution board)
EMC immunity/emission conforms to EN 61000-6-2 /EN 61000-6-4 (with corresponding signal
distribution board)
Protection class EJ module: IP20
EJ system: dependent on the signal distribution board and housing
Approvals/markings* CE, EAC, UKCA,
UL
*) Real applicable approvals/markings see type plate on the side (product marking).
CE approval
The CE Marking refers to the EtherCAT plug-in module mentioned above.
If the EtherCAT plug-in module is used in the production of a ready-to-use end product (PCB in con-
junction with a housing), the manufacturer of the end product must check compliance of the overall
system with relevant directives and CE certification.
To operate the EtherCAT plug-in modules, they must be installed in a housing.