Parameterization and commissioning
CX8095
45
Version: 1.5
6.4.4
Setting the network parameters
If the EtherNet/IP devices have been successfully linked to one another, the network parameters for the
EtherNet devices can be set. The IP address, subnet mask and optionally the gateway address that you
want to use on the CX8095 also have to be entered for the CX8095.
Set the network parameters as follows:
1. In the tree view on the left-hand side, click on
Box (TC EtherNet/IP Slave)
which is appended to the
EtherNet/IP adapter of the CX8095.
2. Click on the
Configuration
tab.
3. Double-click on the entry and enter the desired parameters for the IP address (0x8000:21), subnet
mask (0x8000:22) and gateway (0x8000:23).
ð
You have successfully set the network parameters for the CX8095. In this way you can set the network
parameters for all EtherNet/IP devices.
