Transport and storage
CX20x3
10
Version: 1.0
3
Transport and storage
Transport
NOTE
Short circuit due to moisture
Moisture can form during transport in cold weather or in the event of large temperature fluctuations.
Avoid moisture formation (condensation) in the Embedded PC, and leave it to adjust to room temperature
slowly. If condensation has occurred, wait at least 12 hours before switching on the Embedded PC.
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts. During
transport the Embedded PC must be protected from
• mechanical stress and
• use the original packaging.
Table 1: Dimensions and weight of the individual modules.
CX2033
CX2043
Dimensions (W x H x D)
144 mm x 99 mm x 91 mm
Weight
approx. 1165 g
approx. 1230 g
Storage
• Remove the battery from the Embedded PC if storage temperatures exceed 60 °C. The battery should
be stored separate from the Embedded PC in a dry environment at a temperature between 0 °C and
30 °C.
The preset date and time are lost if the battery is removed.
• Store the Embedded PC in the original packaging.
