Product overview
CP69xx
12
Version: 3.0
3.2.2
USB Extended input
The Control Panel has a USB extended input (X102) in the form of an RJ45 socket. The Control Panel is
connected to the CU8801 USB-to-USB extended converter box via the interface. The interface transmits
USB 2.0 with 480 Mbit/s.
To realize a distance of 50 m without hubs, USB Extended converts the USB signal so that it can be
transmitted via a 50 m CAT-5 cable. In the Control Panel the signal is converted back to USB. This is not an
Ethernet connection. No Ethernet switch or hub can be integrated in the USB-Extended cable.
8
1
X102
Fig. 4: CP69xx_USB-E input pin numbering
Table 3: USB E input pin assignment
Pin
Signal
Description
1
T2 +
Pair 2
2
T2 -
3
T3 +
Pair 3
4
T1 +
Pair 1
5
T1 -
6
T3 -
Pair 3
7
T4 -
Pair 4
8
T4 -
3.2.3
USB input
The Control Panel has a USB input (X103) with socket type B. The USB input is used to connect the Control
Panel directly to the standard output of an Industrial PC at distances of up to 5 m. USB specification 2.0 is
supported.
1 2
3
4
X103
Fig. 5: CP69xx_USB input pin numbering
Table 4: USB interface pin assignment
Pin
Connection
Shield
GND
1
Vbus
2
D -
3
D +
4
GND
