Connections
CB1067
27
Version: 1.0
5.17
PCI interfaces (P1300 and P1301)
The CB1067 board has two standard PCI slots for expansion cards.
Fig. 18: PCI connector
NOTE
Observe pin assignment
In the pin assignment table below, note that for certain signals there are necessary differences between the
different PCI connectors on the board. This applies to the test data signals (A4, B4), the interrupt signals
(A6, A7, B7, B8), the clock signal (B16), the grant signal (A17), the request signal (B18) and the ID select
signal (A26).
