Beckhoff C6925, Manual

Page: 14 / 47

Product overview
C6925 14 Version: 2.1
3.3 Optional interfaces
A variety of interface options are available to you for extending your Industrial PC beyond the basic
equipment level with additional interfaces. The following table provides information about the available
interfaces, depending on the device generation:
Table 8: C6925 interface options
Order option Description Device generation
C9900-E237 Additional DVI-D socket fed out to
a module cover, cannot be ordered
together with an additional
DisplayPort interface C6925-0020
C6925-0030
C6925-0040
C9900-E292 Additional DisplayPort interface,
fed out to a module cover, max.
resolution 1920 x 1080, can be
ordered only once per PC and not
together with a second DVI
connection C6925-0030
C6925-0040
C9900-E294 Additional DisplayPort interface,
covers the fieldbus connection
range, max. resolution 1920 x
1080, can be ordered only once
per PC and not together with a
second DVI connection C6925-0030
C6925-0040
PCIe modules
In addition, you can extend the Industrial PC by PCIe modules by using both of the device's PCIe module
slots. The PCIe module is the Beckhoff definition of a small plug-in card format with a PCIe-x1 bus interface.
Different PCIe modules are available to you, depending on the device generation. Contact your Beckhoff
distributor for the ordering options.
If you purchased your device in the basic equipment version, you can subsequently extend it by the available
modules. To do this, replace the blank panels (see fig. 6) with the PCIe modules by loosening the two Torx
TX8 screws in the panels and tightening them again after inserting the modules.
Fig. 6: C6925_PCIe module slots